An American Ingenuity
OPERATING INSTRUCTIONS
BEFORE OPREATING THE UNIT PLEASE READ THIS MANUAL
THOROUGHLY AND RETAIN FOR FUTURE REFEENCE
OWENER S RECORD
THE MODE AND SERIAL NUMBERS ARE LOCATED ON
THE BOTTON. RECORD THE SERIAL NUMBER IN THE
SPACE PROVIDED BELOW.
WARNING HAZARD
DO NOT OPERATE THIS UNIT UNLESS VEHICLE IS
PARKED IN SAFE AND LEGAL AREA.
ICBM-1-TOUCH
Matters to Note:
Matters to Note
Matters to note:
Installation
Qualified Technicians or Repairmen are expected to install the DVD.
Improper Installation may lead to creepage or short circuit.
To avoid injury or any accident, please read carefully the following remindings
before installing andoperating this machine.
Please check connections first when it does not work well. Ifconnections
are all right, check the fuse then.
On Safety
Please comply with the traffic rules in your country.
Replace the fuse
Don't watch or operate the monitor while driving, which may distract you
and result inaccident.
Fuses in the same specification (current)are required to replace the
original one.
It is verydangerous to usefuses in different specifications orwires, which
may damage themachine severely.
Park your carin a safeplace before watchingthe monitor andoperate this
machine.
Prevent the Surface from Destroying
Don't put yourhands, fingers orother things inthis machine while
operating, which mayhurt you ordestroy the machine.
Keep the machine surface away from chemicals like pesticide,fixature,or
insectifuge, which may distorting the surface..
Put small hardware in places where children cannot reach.
Don't put rubberor plastic itemstogether with themachine for along time,
otherwise the surface lacquer will be destroyed; it may also lead to fire or
other accidents.
On thunder-storm days, don't touchTV antenna and monitor atthe same
time, which may bring you an electric shock.
Turn the power switch toOFF while installingthe machine, otherwiseit
may lead tocreepage or shortcircuit.
Don't let theaiguille destroy anycar parts, likepipes, oil boxor other
circuitries.
Set in sunshine, the car's interiortemperature will risequickly, cool it
before operating thismachine.
TV/AV pictures will not show until the car has been stopped and braked.
Don't watch itwhile driving, otherwisetraffic accident may occur dueto
your distraction.
Dew condensation
If the temperature changes too quickly, there may appear dewfall in the
display screen.It willbe all right soon whenthe humidity vaporizes.
Remember to fastenyour safety beltwhile driving, otherwisethe probable
hurt will bemuch worse ifthere is anaccident.
If you have any doubts or questions, please consult the dealer nearest to you.
About the Machine
Applicable Disks
All DVD, VCD and CD bearing the following symbols can be played in
this machine.
Installing Location
Do not install this in machine where
The drivers' view mey be obstructed.
The operation of the car or the airbag system will be obstructed.
It will obstruct the operation of the car, especially the steerwheel, shift
lever and brakepedal.
DVD Region Code
DVD Disks with incompatible region code cannot be played (this machine is
for all code.)
1
2
Matters to Note
Matters to Note
Reset the micro-processor
The Use and Maintenance of Remote Control
Replacing the Lithium Battery
Press RESET to initialize the micro-processor.
The reset operation is needed only when:
The machine is used for the first time after installation.
This machine does not workwell.
Normally, the battery can last for about 1 year. (Its lifespan may be
shortened due to different working conditions.When the battery power
becomes weak, its function will be narrowed.Replace it with a new Cr2025.
Abnormal or incorrect information appears in the monitor.
Precautions
1
2
Turn the power switch toOFF.
Keep the battery out of the reach of children. Should the battery be swallowed,
consult doctors immediately.
Press RESET with penpoint orother pointed objects.
Wipe the battery with dry cloth to assure a good contact.
Please insert the battery with correct polarity
Do not hold the battery with metallic tweezers, otherwise a short-circuit
may occur.
Precautions:
The battery may explode if mistreated. Do not recharge, disassemble the battery or
put it in fire.
Installing Steps
Take outthe projecting slice at the bottom ofthe card batterywhen it is used for
the first time.
Precautions
Please turn the power switch to OFF before you press RESET when completing
the connection orall the memorieshave been lostand need areset.
Take out the battery buckle
Press the battery buckle and pull it out.
Replace the battery
Put the battery in the buckle with its anode upward
Insert the battery buckle
Push the buckle to its original
position.
Back of the remote
Battery tank
Battery
Transparent slice
3
4
Connection Instructions
Connection Instructions
AV Output
Red
White
Yellow
FL
FR
Backing Radar
TV Antenna
Radio Antenna
VIDEO
White
Grey
FR
FL
RR
SWR VIDEO
Front
Left
Front
Right
Purple
Green
Back
Back
Optical Output
R
W
Y
AUX Input
CDC
RL SWL
Blue&Whitel Hand Brake
Lens
RL
RR
Blue
Backing
Brown
Power Amplfier Control
Orange
Black
Red
Power Antenna
Ground Wire
ACC
SWL
SWR
Yellow
BATT
5
6
Touch Key Functions
Touch Key Functions
2
Touch Key
Sound Menu Function Key
2
Touch this key, and the sound menu will appear.Any item inthis
menu can be touched and selected freely.BASS, TREBLE,
BALANCE and FADER can all be adjusted. While adjusting
BALANCE or FADER,one can use the demonstrated arrowhead;
when the cursor changes from pink to green,it means the sound
field is located in central position.
MODE
MUTE
18
19
EQ
4
3
17
16
5
6
EJECT
20
15
+
MENU
21
22
10
SOUND
MENU
9
2
1
14
13
DISP
23
24
ANG
12
11
7
8
BASS
SRC
TREBLE
BALANCE
ICBM-1-TOUCH
FADER
+
Touch Key Functions:
Notes: Touch Keys 1 2
they will not be valid until there is no menu display.Keys 4 8
3
5
6
7 are used to activate menus,
EXIT
NEXT
9
10 are valid as soon as the machine is on.
1
1 Touch Key
SRC(Vedio source)Function Key
+3
-
+
This key is valid only when the machine is on. Touch it, and the
following menu will appear. Touch and select one, the machine
will change to that play source. The machine will enter the
highlighted item 2 seconds later if there is no further operations.
3
Touch Key
Sound Pattern
3
Touch this key and Sound Pattern Menu will appear.Touch and select
wanted sound pattern. Patterns like ROCK STANDARD, CLASSICL
JAZZ have been preset.
AUX
TUNER
DVD
CDC
EQUALIZER
LAST
ROCK
TV
STANDARD
CLASSICAL
JAZZ
EXIT
EXIT
8
7
Touch Key Functions
Touch Key Functions
4
5
Keys
Monitor Angel Adjusting
4 8
System Menu Page 1
Press and
4
toadjust the monitorangels within itsvariation scope.
8
Key
Picture Mode Menu
5
BRIGHT
CONTRAST
COLOR
PIC
SETUP
MODE
Touch this key toactivate picture modemenu.Touch and select wanted
picture mode. Fourmodes are presethere:
RESET
LAST
STANDARD,NIGHT,CUSTOM,and BRIGHTNESS.
NEXT
EXIT
PIC MODE
LAST
CUSTOM
NIGHT
15
-
+
STANDARD
BRIGHT
EXIT
System Menu Page 2
6
Key
System Menu
6
Touch this key to activate System Menu, which has 3 pages, each item of
MIRROR
BLUE
PIC
the menu canbe touched andselected freely.
SETUP
MODE
Among them are PIC item on page 1:
CLOCK
TUNE
BRIGHT
CONTRAST
COLOR
LAST
NEXT
RESET
EXIT
and SETUP item on page 2:
MIRROR
BLUE
CLOCK
TUNE
and MODEitem on page 3:
Picture Modes
10
9
Key Functions
Key Functions
9
Keys 20 and 22
Menu Adjusting
7
Funciton Touch Key
7
Touch this key, different menus will appear in different program sources
(DVD,CDC,TV .Please refer to related chapter.
Adjust relevant menu item when there is a menu display. If no
menu display, they will change between TV and RADIO,change
music in CDC mode,and function as Fast Play in DVD mode.
10
Touch Keys 9
Touch these keys to increase or decrease the volume.
Key 11 SRC (video sources
Volume Adjusting
Key 21
MENU(Main Menu)
1
2
Same as the Main Menu Touch Key
On idle state, this key will display SRC menu (power on).In practice, this
key is long-pressed to turn off the machine (OFF). Other functions of this
key is the same as Touch Key SRC.
11 Key 23
DISP(Display
This key functions differently under different states:
DVD state: Turn on/off DVD OSD display
CDC state: Turn on/off CDC information display
Idle state: Check and adjust time
Key 12
ANG(angel
Press this key on power-on state, the angel of the monitor will change within the
scope of Minimum and Maximum angel until the key is let go.
Keys 13 and 15 (VOL)
Volume and Sound Adjusting
12 Key 24
IRRX Window
Press Left to decrease, press Right to increase when power is on until the
key is let loose..
Never cover this window, avoiding the malfunction of remote operations.
4
Key 14
SOUND MENU
The function of this key is the same as Touch Key 2 (sound menu).
Key 16
EJECT (DVD eject key)
5
In standby state, press the key to enter DVD mode. The DVD disc
shall eject automatically. In other state, press the key to enter DVD
mode automatically the DVD disc shall eject automatically. During
the process of eject, if the display block the disc eject, the display shall
descend to a proper position to ensure the eject. (If the display has
descended, it will go back to the original position before eject by
pressing the ANG key for the first time.)
Precaution: Don't press the ANG key until the disc enters the machine
completely.
6
8
Key 17
Its function is the same as Touch Key 3 (sound pattern)
Key 18 MODE(picture modes)
Its function is the same as Touch Key 5 (picture modes)
Key 19 MUTE
Turn on and off the sound
EQ(sound patterns)
11
12
Keys on Remote Controller
Keys on Remote Controller
19 MENU (main menu)
ANGLE
POWER
MODE
6
7
Menu Selection(+)
20 ENTER(setting
DISP
SRC(Playing Source)
The machine will be on once
10+
Confirm in DVD mode,(long-press it DVD menu)
Save in TV and RADIO mode.
21 Menu Select
the playing source is selected.
This key can switch among DVD,
CDC, AUXand TV.The machine
will enter the selected item if
there is no further operating for 2s
The machine will be OFF if this
key is pressed for over 2s.
PAUSE
PLAY
22 GOTO(switch to DVD)
SRC
AUX
Press this keyand input numberand press confirmkey, the program
will switched to relevant position.
23 EQ
ENTER
8
9
Menu Selection(-)
AS
SET
SOUND
BAND Key
Press this keyto select different modes:
This Key canbe switch between
MONO
13
FM1 FM2 and AM,a long press
means AS of FM.
STANDARD
JAZZ CLASSICAL ROCK
Lp2508
24 REPEAT
10 Volume(+)
1
POWER
Long-press Key 5, can repeat playback when playing a DVD.
11 SOUND
Press it to switch off the machine
Press this key can switch
between Low,High, Balance and
Fader.
and the monitor will retract to the
MIN angel.Press it to start the system
on idle state, and the monitor angel
will rebound.
25 SOUND CHANNEL SWITCH
Long-press key 7 to switch sound channels:
12 VOLUME(-
R+R
L+L
STEREO
13 MUTE
2
MODE
26 AC3/DTS SWITCH
Press this key to switch
between Mute and Sound
14 ANGLE
Press it to select different preset
pic modes:STANDARD, SOFTNESS
CUSTOM, and BRIGHT.
Long-press Key 8, it will change between Ac3 and DTS
27 TITLE SWTICH
Change the angel of LCD panel
15 Information Display
17 AUX(auxiliary input
Press it to swithc between
AUX and CAMERA
18 Menu Adjustmeng(+)
3
Number Keys
long-press 0 means 10
PLAY
Long -press key 9,it will change the title.
4
Put in disks, and press this key
Notes
to play; long-press it to PAUSE.
5
16 CHANNEL(+/-)
Some keys are valid only in specific situations
Long-press means to press the key over 2 seconds
Change music in DVD mode,
change disks in CDC and change
channels in TV/RADIO mode.
13
14
Basic Operations:
Basic Operations
Adjust the Monitor Angel:
SRC Functions
Press ANG key on the monitor panel, the monitor will move within
the minimum and maximum angels, until the key is let off.
If it is a short press, the monitor will be slightly adjusted following
its original direction.
The machine is on once the playing source has been selected Press this key
to switch between the following playing sources:
1.AUX
2.CDC
Select Auxiliary Input
Select Disk Input
Touch the angel adjusting area on the monitor panel, area (4) is to
increase the angel, and area (8) is to decrease.
3.TUNER Select Radio, and radio menu will be displayed
4.TV
Select TV Input
Precautions:
5.DVD
6.EXIT
Select DVD Input
Exit, Close the System
While adjusting the angel of the monitor panel, press ANG key
or touch the angel adjusting area. Do not move or press the
monitor by hand, or serious damage may occur.
The playing sources can be selected through touching directly,
and the system will enter the highlighted item if there is no selection
after 2 seconds.
Playing DVD:
Turn Off the Machine:
Press SRC to select DVD, insert valid disk in the disk box.
Insert valid disk in the disk box directly. When the DVD playing
menu appear, press PLAY (or SET) key, the systemwill play thedisk
automatically. If you want to exit, press EJECT.
Long-press SRC key,OFF will appear and the system closed.
Press SRC, touch menu will appear, select EXIT.
Switch off ACC power source.
Precautions
The monitor will retract automatically to the minimum angel.
The machine will retract automatically and close 5 seconds later
if the power switch is turned from ON to OFF.
Precautions:
The system can play one 12cm or 8cm DVD disk (single-sided)
Please do not use adapters while playing 8cm disks.
Do not insert anything except disks in the disk box.
If you can'tinsert a whiledisk, or itcannot be played, please check
whether the labelside is upward. Press EJECT to take outthe disk tosee
whether there is any damage before inserting it again.
If DVD indicator displays RED, it means there is no disk in the box.
If it isblue, it meansthere is adisk. Do notinsert diskforcefully in
this situation, so as not to harm the interior devices..
When the power switch is turned to ON or ACC again, the system
will reset automatically and rebound to its previous status.
When the system is turned off, pls make sure all the panels are
closed. If the closing of the monitor stops for some obstacle and
nothing is done to change it, damage may occur.
Volume Adjusting
1.Use the Volume key onthe host panel.
2.Touch the volume adjustingarea
3.Use the Volume key onthe remote controller
15
16
Tuner
Tuner
Listen to the Radio:
Basic Operations:
Advanced Function Operations
1
Semi-automatic Seeking
Press menu adjustingkeys on remotecontroller for 2seconds or touch
Change Bands
the semi-automatic seekingarea on thescreen, the systemwill begin to
seek proper frequency. Current frequency will be displayed.
Press BAND repeatedlyuntil you find needed band.
Touch current band area to change the band.
The following bands will bedisplayed in turn: FM1--FM2---AM
2
Automatic Seeking
Press BAND button for about 2seconds or touchthe Automatic Seek
Use the Preset Radio Stations
Select with number keys on the remote controller
Directly touch the memory radio stations
-ing area onthe screen(ASM),the systemwill seek channelsautomatically
starting from 87Mhz until the memorizeris full(20 channels)orreaches
the highest frequencyof 108MHz.
3
Manual Storage
Fine Frequency Adjustment
Press SET(or ENTER on the remote)when the best frequency is found
Use menu adjusting keys on the remote controller
Directly touch fine adjustment area on the screen
and current frequencydisplay will glitter.Select storage locationwith
CH+,CH- and thenpress SET(or ENTER)to store it.
Touch current frequency, it willglitter and thecolor turns toRED. Touch
and select storage location, then touch current frequency, it will stop glittering
and be stored.
Fine
Adjustment+
Fine
Adjustment-
Current
Frequency
Current
Band
Precautions:
TUNER
08 08
1
2
3
4
Press any key to stop auto seeking.
BAND FM1
89.30MHz
This machine canpreset 30 chnnels,10for Fm1 andFm2 respectively.
Automatic seeking is valid only for FM.
0: 87.00MHz
1: 88.00MHz
2: 89.00MHz
3: 90.00MHz
4: 92.00MHz
5: 94.00MHz
6: 96.00MHz
7: 98.00MHz
8:100.00MHz
9:108.00MHz
During manual storage, no other key operation is permitted when the
ASM
display content is glittering.
Automatic Seeking
Semi-automatic Seeking
Preset channels
Preset channels
18
17
DVD Playing
DVD Playing
DVD Function Operations
1 DVD Playing and Pausing
To Operate with remote controller
Press PLAY on the remote to play,long-press it to pause.
Touch PLAYto play disks.
To useTouch Key Functions:
Press the function keys area, the following 2 pages information about touch
Press PLAY again to stop PAUSE and continue to play.
keys will be displayed.
2 DVD Stop Playing
OSD Info
DVD Info
DVD Function Keys page 1
Touch STOP key to stop playing.
3 Backward and Forward
DVD
01:08:08
T:08
01:08:08
Press menu adjusting keys on the remote or touch keys
and
when
DVD is playing to Backward or Forward. Press PLAY to resume playing.
EXIT
Music Selection
OK
PLAY
While playing, press menu adjusting keys or touch keys
play the previous or next item.
and
to
STOP
NEXT
5 Skip to designated item
DISP
INFO
SET
Press GOTO once,the following will be displayed:
Title
01 / 02 Chapter
008 / 020
Current title
Totalitems
Totaltitles
Current item
DVD Function Keys page 2
Input wanted skip number and press OK,DVD will switch to play
relevant music item. If the number is over 10, press 10+first, then
press other numbers. For example, press 10+ twice, and then press
8 to get 28.
DVD
01:08:08
T:08
1:08:08
+
EXIT
MENU
TITLE
NEXT
0
2
5
8
10
3
GOTO
.Skip to Designated Time
1
4
7
Press GOTO twice, the following will be displayed:
6
Title
01 / 02
Time -- : -- : --
9
Current item Totalitems
OK
Input the time and press OK, DVD will continue to play from relevant time.
19
20
DVD Playing
DVD Setup
The Main Page of DVD Setup
7
8
9
DVD Information Display
Touch key INFO can control the way of DVD info display.
Long-press ENTER on the remote or touch SET in DVD operation menu to
perform general setup, speaker setup, audio setup etc.
OSD Info Display
Touch key DISP can control the way of OSD info display.
Setup Menu---Main Page
DVD Playing Menu
General setup
Speaker setup
Touch key MENU can activate DVD menu; touch direction keys
and OK to play DVD.
Audio setup
Kara OK setup
Initial setup
9
DVD Title
Touch TITLE to come back to DVD title menu.
Exit
Precautions:
1
Since there is2 pages oftouch menu,LAST and NEXT has to beused to
select relevant page, press EXIT to exit the menu.
General Setup
2
3
The above operations and information will vary a little due to different disks.
Due toits special savingformat, special operationsare needed while
playing MP3.
In the setup mainpage, select General Setup through direction keys, press
ENTER on the remote or touch SET to enter General Setup page as follows:
To play Mp3 from designated folder:
Move cursor todesignated folder throughdirection keys, pressOK
to enter this folder and select files from it through direction keys.
PIC Mode
Angel Label
English
Chinese
Russian
Language
Hide Caption
Screen Savers
Mainpage
21
CHN
21
22
Initial Setup
Speaker Setup
Select Initial Setup through direction keys on the mainpage, press SET or
touch SET to enter Initial Setup page as follows:
On Setup Mainpage, select Speaker Setup through direction keys, press SET
or touch OK to enter Speaker Setup page as follows:
TV Form
TV PAL
A U T O
N T S C
P A L
Center Speaker
Rear Speaker
Bass Speaker
Center Delay
Rear Delay
S t e r e o
Vedio Output
Sound
5 . 1 T r a c k
Caption
Disk Menu Language
Age Control
Password
Tone Test
Audio Setup
Precautions:
Select Audio Setup through direction keys on the mainpage, press SET or
touch OK to enter Audio Setup page as follows:
1
2
Touch Direction Keys (or menu selection keys on the remote) are used
in DVD setup;
Normally, do not change the initial setup;
O F F
SPDIF OUTPUT
L
Simulating Audio Output is prohibited once SPDIF output is selected;
This machine supports PAL and NTSC, so try to use NTSC;
The default OSD language is English, and the PAL and NTSC tv tuner;
Karaoke function is not set, do not set Karaoke menu;
The initial password is 8888;
R
S P D I F / s o u r c e c o d e
S P D I F / P C M
Compression of Dynamic Range
Audio Setup
LPCM Output
As long as disks are inserted, the machine will be in DVD playing mode.
Precautions In AudioSetup, SPDIF OUTPUT controls simulating
output or opticaloutput, and simulatingaudio output isprohibited where optical
output exists.
s long as
is pressed, the machine will convert to DVD mode,
relevant information will be displayed and disks are ejected automatically.
23
24
TV
Press the Function Touch Area on the monitor, the following TV
touch keys will be displayed:
Press function touch area on the monitor, the following CDC touch
keys will be displayed:
-
+
DISC
1
10
2
DISC
EXIT
-
CH+
CH
1
0
2
5
8
3
6
9
3
6
9
TUNE
4
7
5
STORE
4
7
8
-
+
EXIT
PLAY
Playlist Selection
Touch
and
, or press menu adjusting keys on the remote to
1 Automatic Seeking
select Previous or Next item on the playlist.
Forward and Backward
In TV Mode, select TUNE from the System Setup, or press touch keys
and touch TUNE, the system will start to seek automatically from VIF.
The seeking will not stop until the stored channels reach 100. Press any
key or touch any valid place on the touch screen will terminate the seeking.
The first saved channel will be used after the seeking.
Press
, the system will go forward or backward, relevant
information will be given. Press the button again, stop
Forward or Backward.
Replace the disk by hand
Touch DISC or press
on the remoter to play previous or
next disk. Press the number keys on the remote to play disk with
designated number; if the disks have not numbers, the system will
just play the next one by sequence.
SEARCHING
02
Automatic Replacement of Disks
he system will select next disk when the former one has been finished.
Precautions:
When the multi-disk CD player is ready, READY will be displayed.
If the CD player can't work well, ERROR will be displayed.
If the disk case is taken out, NO MAG will be displayed.
If the case is in the box but there is no disk, NO DISK will be displayed.
VLF
30
Press PLAY if it does not play automatically after replacing the disk.
25
26
TV
Clock
Check the clock when the machine is in idle state.
2 Play Preset Channels
Press
or open TV touch menu, touch CH+ and CH- to select
previous or next channel. When the channel number is the maximum one, the
system will change to the minimum channel. For example, if there is altogether
18 channels, and we are using channel 18 now and continue to select upward,
In idle state, press DISP button on the panel or remote once to
display clock as follows:
the channel will transfer to channel 0.
Input numbers to select channel. If the first number is input and there is
OPERATION
no further input for 2 seconds, the system will seek channel corresponding to
the first number.
1 : MENU
2 : MENU
3 : DISP
4 : SRC
SELECT
ADJUST
STORY
EXIT
3. Fine Tuning
Touch Left or Right fine tuning button or use the remote controller. If
the key is pressed continuously, the tuning effect will change continuously.
08:08
4 Manual Storage
Use touch key STORE or press ENTER on the remote, STORE XX will
be displayed. Press CH+ and CH- channel selecting keys on the remote) to
select wanted channel, then press STORE or ENTER.
Setting the Clock
Press DISP button twice in idle state to enter clock setting, the clock
is indicated as red, which will glitter while the time is adjusted.
Use menu adjusting keys to select position; use volume keys to
adjust the time. The system will be in idle state 5 seconds after the operation.
5 Blue Screen
Quite large noises will occur when the TV signal is too weak. To avoid
this situation, one can start BLUE SCREEN function. The screen will turn to
blue and mute when the signal is too weak.
Precautions:
1
2
3
At most 100 channels can be stored in this machine.
If the receiving effect is bad, check the connection of antenna.
If the bad effect is caused by weak signal or high-speed driving,
it does not mean something is wrong with this machine.
27
28
Supplementary Information
Supplementary Information
Malfunction Eliminating
Measures (advices)
Problems
Possible reasons
Problems
Possible reasons
Bad turnoff, orthe disk
has been damaged.
Replace it witha better one
Can't be switched
on, unable to use
the machine.
Incorrect connection of
downlead and linker.
Make sure all connections are
correct
The disk cannotbe played
Fuses melted
Find out thereason, and
replace the fuseof the
same specifications.,
Parent locking function
is turned on
Close this functionor degrade
its level
Display parent locking
can't be played
Noises or otherfactors
make interior micro-
processor unable towork
well
Press RESET torestore
the machine toits initial
setup.
Can not switch languages
or captions
Current disk doesnot
have multi-languages
Cannot switch languages
Use disk menuto switch
Can't use remote
controller.The
machine refuses
to work eventhe
remote is correctly
used.
Insert new battery
Insufficient battery power.
Some operations are
prohibited in certain
circumstances.
Youcan only switchbetween
items displayed
Enter correct circumstances
Current DVD diskdoes not have
Unable to displaycaption
Use disk menuto switch
No caption
Disks are dirty
Clean the disks
Youcan only switchbetween
items displayed
Cannot be played
Disks used notsuitable
to this machine
Check the disktypes
Does not play in the
Current disk doesnot have
the language orcaption set
in DVD SETUPMENU
Unable to playthis way
Change another disk which
is compatible to your video
system.
The Video system ofthe
disk incompatible to the
machine.
language and caption
set in DVD SETUP MENU
Current disk doesnot have
multi-angel scenes
Unable to switch between
different angels because
there is no such angels.
Unable to switchthe
view angel
No sound
Incorrect linking of cables
Link the cables correctly.
The machine is in MUTE
state, or slow-motion
or playing frame by frame
The volume does not
increase
In such kindof situations,
no sound output.
Youtry to switchbetween
different angels, butthere
is no recordedmulti-angle
scenes.
Use switch whenthe disk has
multi-angel scenes
Certain speaker
cannot ouput sound
Incorrect setup ofsound
fields
Setup sound fieldscorrectly
The pictures are
extremely obscure,
distorted and
blurred
This machine iscompatible
with anti-copy system,but
there may besome parallel
lines or otherthings while
playing, this doesnot mean
a problem ofthis machine.
The disk hasanti-copy
information.(some disks
have this function)
No pictures,or
display PIC OFF
Link hand-brake line, and
open it.
Hand-brake line notlinked
hand-brake not opened.
When the power
switch is turned
to ON orACC,the
machine boot
Normal function.
Automatic Booting
No optical output
The optical outputin DVD
setup menu isclosed
Set Optical Outputas ON,
(note:optical ouput means
audio output is
automatically
prohibited.)
29
30
Supplementary Information
Maintenance of DVD
Supplementary Information
CD-R/CCD-RW Disks
While using CD-R/CD-RW disks, only completed ones can be used.
CD-R/CD-RW Disks recorded fromCD Recorder orpersonal computer may
not be playeddue to theirspecial nature, scrape, dirtiness; or thedirty lens, dew
of the machine.
Use normal disks only.If irregular, non-round or srtange shape disks are
inserted, they maybe hooked inthe machine orcan not beplayed correctly.
Check all disks before playing and see whether there are cracks, scrapes or
crimp. Such disksmay not beplayed correctly. Do n not use them.
Do not touch the recorded side (no print) while taking disks. When they are not
used, put them in the box.
Disks recorded personallyin computer maynot be played, which is determined
by their formats and adaptable circumstances. Use correct formats to record.
CD-R/CD-RW disks may not be played in direct sunshine, places with high
temperature or theparking place ofthe car.
Do not putdisks in placeswith direct sunshineor high temperature.
Do not pastelabel, draw thingsor use chemicalson the disksurfaces.
Use soft drycloth to cleanthe disk fromthe center tooutside.
There may bemoisture in DVDdevices if youuse heating systemin winter.
And the dew may prevent DVD from normal working. Turn off the machine
for about anhour to makeit dry ifthere is anydew. Use soft anddry cloth to
wipe moist disks.
The titles and other text information recorded in CD-R/CD-RW disks may not
be displayed in this machine.(in the case of CD-DA)
The time of playing CD-RW in this machine will be longer than traditional CD
or CD-R.
Read the relevant instructions before using CD-R/CD-RW.
Serious shaking on road may intermit the playing.
DVD Disks
For some DVD disks, certain functions may not be performed.
Some DVDs cannot be played.
While using DVD-R/DVD-RW disks, only video filescan be played, normal
computer files cannot be played.
DVD-R/DVD-RW Disks recorded invideo mode maynot be playeddue to
their special nature, scrapes, or dirtylens and dew.
Disks recorded personallyin computer maynot be played, which is determined
by their formats and adaptable circumstances. Use correct formats to record.
32
31
Supplementary Information
Supplementary Information
Matters to Note about Remote Controller
MP3
Do not put the remote on panels, steering wheels, or where with direct
sunshine. The temperature in these places are high in summer and the
remote may be distorted.
Mp3 is the abbreviation of MPEG audio layer3, which is the standard of audio
compression technology.
Mp3 files on CD-ROM CD-R and CD-RW can be played in this machine. Disks
compatible with ISO9660 level 1 and 2, or with ROMEO and JOLIETsystem
can also be played.
If the car is parked in the sun, put the remote in the tool box or other
places away from the sunshine. In the sunshine, the signal from the remote
may not be received correctly by the host machine, you have to put the remote
near the sensor on the host panel.
Recorded disks with multi sections can be played.
Mp3 files are incompatible with the transporting of read-in data.
The max char width of the file name (including the extending name .Mp3)
is 32 (counting from the first char).
About LCD
The max char width of the folder name is 32.
Do not press LCD, which may distort the pictures or arouse problems.
Pictures become blurred, or even the LCD is harmed.
If the file is recorded through ROMEO and JOLIETsystem, only the former
32 char are displayed. While playing disks with Mp3 and CD-DA, such as
CD-EXTRA and MIXED-MODE CD, the system can only switch between Mp3
and CD-DA.
About Cleaning LCD
Use soft cloth with a little water to clean LCD.
The selected folder sequence of playing and other operations will be the
sequence to write in the software. So the anticipated sequence of playing should
not conflict with the actual playing sequence. However, there are indeed some
softwares in which playing sequence is allowed to set.
Do not use solvents like gas, thinner, detergent in the market or static
electricity-resisting sprayer.
Do not use this machine when the temperature is below -15 or over 45.
If your car is parked in a very cold or hot place, pictures may not be clear.
This is not the question of LCD. Pictures will become clear again once
the temperature comes to normal.
The file is compatible with Id3 Label version 1.0 and 1.1, so as to display the
music titles and authors. The enhancing function is valid only when playing
Mp3 in 32,44.1 and 48 Khz. Sample frequencies 16,22,05,24,32,44.1,48KHz
can be played.
There may appear static blue or red points called bright spots which
can appear on any LCD. LCD is a very fine apparatus, 99.99% of
which is normal, with only less than 0.01% defect leading to those points.
They will not influence your appreciation of pictures, however.
The tone of Mp3 file can usually be bettered when the bit rate is increased. This
machine can play recordings between 8KBPS and 320KBPS. But in order to
enjoy good tone, we recommend disks over 128KBPS.
IMPORTANT:
While naming an Mp3 file, add relevant extending name .mp3.
This machine will play files with .mp3 as Mp3. Do not use this extending name
on non-mp3 files so as to avoid noises and other problems.
33
34
Supplementary Information
Information about Touching Screen
Product Specification:
Matters to Note in Using Touching Screen:
Power
13.8V DC(10.8-14.5V)
Grounding system::
NegativePolar
Touching screen is solid and reliable, however, one should still keep the
following in mind:
Host:
1
2
Do not scrape the screen hard, slight touching is enough;
max current:
size (width*height*depth)
Body:
15A
Touching Screen is notwater-proof. In extreme case, waterwill enter
the circuit throughpanel;
178*100*180mm
3.5Kg
Weight:
3
4
Touching Screen includes a plastic unit, do not knock or press it hard.
keep the screenfrom high temperature, dust and humility.
SCREEN:
Size/Aspect Ratio:
Pels:
6.5inch wide/16:9(valid area143*79mm)
Menu locations on the touching screen:
280,800(1200*234)
Type:
TFT Active Matrix
PAL:
NTSC/PAL compatible(SECAM is to becustomize)
MODE
MUTE
EQ
MODE
ANG+
EQ
Temperature Scope:
Storage Temperature:
Angel Adjusting: :
-20--+70.C
-30--+80.C
0-50
EJECT
+
SOUND
MENU
MENU
VOL+
AUDIO:
VOL-
SOUND
MENU
MENU
Max Power Output:
Resistance
50W*4
4
scope of variation 4-8
Front Output Level/Resistance: 4.0V/200
DISP
ANG
Encoder:
Linear PCM/Dolby Digital/Dolby Professional
ANG-
SRC
FUNC
SRC
Editor II/DTS
ICBM-1-TOUCH
DVD Player
System:
Disks:
DVD Audio, DVD Vedio, VCD,CD,DTS CD and MP3
DVD Record, DVD Film,VCD,CD,DTS CD
2(stereo), Digital 6 tracks
Tracks:
Mp3 Encoding Format:
MPEG-1 and 2, Audio Layer3
FM Tuner:
Scope of Frequency:
Valid Sensibility:
AM Tuner:
87-108.0MHz
10 dB(0.7 /v/75 , Single Track,S/N:30 dB)
Scope of Frequency:
Valid Sensibility:
531-1 602KHz(9KHz)
18 V(S/N 20 dB)
35
36
|