Operation Manual
NIGHT VISION RIFLESCOPE
NVS 22-2XT
105 Sparks Ave., Toronto, ON M2H 2S5, Canada
TABLE OF CONTENTS
1.
BRIEF DESCRIPTION...........................................................2
1.1.
1.2.
Overview.........................................................................2
Key features of NVS 22-2XT .........................................2
2.
3.
4.
5.
DESIGN of NVS 22-2XT........................................................3
SPECIFICATIONS .................................................................4
DELIVERY SET.....................................................................5
OPERATION INSTRUCTIONS.............................................5
5.1.
Battery installation..........................................................5
Testing NVS 22-2XT in the daytime..............................6
Testing NVS 22-2XT at night.........................................6
Testing NVS 22-2XT at night with day time scope........6
5.2.
5.3.
5.4.
6.
7.
8.
INSTALLATION ON A RIFLE .............................................7
STORAGE AND MAINTENANCE.......................................9
TROUBLESHOOTING ........................................................10
8.1.
The scope does not turn on ...........................................10
The target does not appear in focus. .............................10
Image has disappeared..................................................10
Condensation accumulates on the parts ........................10
Black dots on the screen ...............................................10
8.2.
8.3.
8.4.
8.5.
9.
WARRANTY........................................................................11
10. CUSTOMER SUPPORT.......................................................12
11. ACCEPTANCE CERTIFICATE ..........................................13
1
1. BRIEF DESCRIPTION
1.1.
Overview
NVS 22-2XT is a night vision attachment to a daytime weapon scope
designed for precise aiming in darkness.
The device is equipped with a high-quality electro-optical image
intensifier tube that amplifies light in the visible and IR spectrum
providing for up to a 400-700 m effective observation range at low light.
Observation range depends on the characteristics of the day scope NVS
22-2XT is attached to and actual observation conditions, such as
available light, atmosphere transparency and target reflectivity. The
observation range increases by brighter light, at moon night, or if the
object is positioned against a light background, such as snow or grass.
The range decreases at lower light, low atmosphere transparency, or if
the object is positioned against dark background, such as plough-land,
desert, stems of trees, etc.
1.2.
Key features of NVS 22-2XT
•
Installation of NVS 22-2XT in front of a day scope on a weapon
does not affect the latter’s zeroing and scope’s tactical parameters
•
•
•
•
•
•
•
•
•
Exit pupil of 35 mm fits a broad range of day scopes
Accurate internal focus adjustment mechanism
High quality image within the entire field of view
Withstands large calibre recoil
Supplied with MIL-STD-1913 Weaver / Picatinny mount
Water-resistant design
Can be equipped with optional powerful IR Illuminator
Automatic bright light protection of image intensifier tube
Low power consumption: two standard AA batteries ensure
operation for 60 hours
•
Compact and lightweight
2
2. DESIGN of NVS 22-2XT
4
3
5
9
2
6
1
9
10
8
5
7
11
Fig .1
1 – Device body
6 – Objective lens cap
7 –On/Off switch
2 – Objective lens
3 – Eyepiece
8 – Focus adjustment knob
9 – Weaver mount
4 – Rubber eyepiece guard
5 – Battery compartment
10 – IR illuminator mount
11 – IR illuminator mount
3
3. SPECIFICATIONS
Optical
Magnification, x
1
8
Field of view, degrees
Day Scope magnification, x :
Acceptable
Recommended
1-20
3-5
Focus length, mm
F-number
110
1.6
Focus range
20 m to infinity
Image intensifier tube
Type
18mm MCP
25,000
Gain, min
Resolution, lp/mm
54-64
Infrared illuminator (optional)
Type
IR diode
75
Power, mW
Illumination angle, degree
Illumination spectrum, nm
Electrical parameters
Power supply
8-10
805
2 AA batteries
Voltage, V
3
Continuous work time, h, min
60
Mechanical characteristics
Dimensions, mm
Weight, g
258 x 80 x80
985
Environmental conditions
Operating temperature range
Relative humidity
-50ºC to +50ºC
98%
NOTE: As the design is being continuously improved
some parameters may differ from those given above.
4
4. DELIVERY SET
NVS 22-2XT is supplied with in the following set:
- Device
1 pc.
- Objective lens cap
- Rubber eyepiece guard
- Picatinny rail mount
- Operator’s manual (this document)
- Warranty card
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
- Soft case
- AA Batteries
Optional accessories:
- IR illuminator
- Hard Case
1 pc.
1 pc.
5. OPERATION INSTRUCTIONS
WARNING!
Lens cover should be always on when switching on NVS 22-2XT in
bright light conditions. Never aim the lens in the direction of bright
light.
5.1. Battery installation
NVS 22-2XT requires two AA batteries.
Prior to installing the batteries make sure
they are in good condition.
To install batteries unscrew the battery
compartment cover 5 (Fig.1), insert
batteries, observing correct polarity, and
screw the cover back on.
NOTE: Alkaline batteries provide longer
operation time and maximize the power of
the IR illuminator.
5
5.2.
Testing NVS 22-2XT in the daytime
Daytime mode of NVS 22-2XT was designed for testing purposes
only. Image may be fuzzy.
To test the device in the daylight:
1. Turn switch 7 (Fig.1) into ON position.
2. Direct the device at an object within 10-20 m from the viewer.
3. Turning the focus knob 8 (Fig.1) adjust focus to obtain the
sharpest image visible through the eyepiece.
NOTE: The device is not supposed to be directed at a bright source of
light: bright lamps, the sun, welding glare, etc – doing so may result in
permanent reduction of the light amplification ability of the device. To
avoid the fatigue of the photocathode do not leave the stationary device
switched on in the excessively bright environment (dawn, dusk, daylight,
etc.) for more than 30 minutes.
5.3.
Testing NVS 22-2XT at night
To test NVS 22-2XT in darkness:
1. Take off the lens cap 6 (Fig.1)
2. Turn on the device using switch 7 (Fig.1)
3. By turning knob 8 (Fig.1) and eye-piece 3 (Fig.1) obtain clear
image of the object.
5.4.
Testing NVS 22-2XT at night with day time scope
1. Install NVS 22-2XT (see Chapter 6 “INSTALLATION ON A
RIFLE”)
2. Take off the lens cap 6 (Fig.1).
3. Turn on the device using on/off switch 7 (Fig.1). Greenish image
must be seen through the daytime scope.
4. Select necessary zoom of the daytime scope. By turning knob 8
(Fig.1) of NVS 22-2XT acquire the target through daytime
scope.
6
6. INSTALLATION ON A RIFLE
1) Loosen slightly the Clamp screw 11 (Fig. 1) of the adapter rail.
2) Place the NVS-22-2XT onto the Picatinny rail of the fire arm before
objective of daytime scope at the minimal distance from it.
3) Tighten the fixing Clamp screws 11 (Fig. 1)
NOTE:
- Clamp screws may need to be tightened again after continuous
shooting.
- Open the lens cap of the daytime scope prior to installation of
NVS 22-2XT. With NVS 22-2XT mounted in front of the scope it may
be impossible to take the scope lens cap off.
When mounted in front of the daytime riflescope, depending on the
daytime riflescope and position of night vision attachment to the day
time riflescope the complete system may change zeroing (bore sighting)
no more than 1MOA at 100 m.
This is related to changes in the weapon balance, light distortions in the
image intensifier tube, technological limits in the adjustment of the
riflescope attachment. This imprecision usually appears as fixed value
and can be easily compensated by the adjustment mechanism of the
7
daytime riflescope. Thus, it is recommended to estimate if adjustment is
required for a night vision sight in combination with daytime riflescope
by bore sighting daytime riflescope with and without night vision
attachment. Value of the required adjustment should be noted in clicks of
the riflescope and shall be used each time when nigh vision sight is being
used.
RECOMMENDATION:
Please make sure that night vision attachment is mounted on the rifle
with the following tolerances related to position of daytime scope axis:
- maximum permissible misalignment of optical axes shall be within ±1
mm in both vertical and horizontal planes
- maximum permissible misalignment of optical axes shall with ±1
degree in both vertical and horizontal planes
Due to manufacturing process and design of image intensifier tubes, it is
not always possible to eliminate boresight alignment of 1MOA at 100 m,
which could appear during shooting. It is recommended to make 10-15
shots during the scope testing as an additional test before operation in
real conditions.
8
7. STORAGE AND MAINTENANCE
Warning
If NVS 22-2XT has been kept for a long time at temperature lower than -
40°C (-40°F), then prior to using the device must be warmed up at an
ambient temperature of -10°C (14°F) to +40°C (104°F) with relative
humidity below 80%.
NVS 22-2XT is a sophisticated precise optical instrument equipped with
electronics. It should be handled with due care:
• Unit contains fragile components and sensitive optics. Avoid impacts,
dust, moisture and sharp changes of temperature.
• Do not touch the optical surfaces other than for cleaning. Doing so
may damage the anti-reflection coating.
• Clean optical surfaces with professional lens cleaning supplies.
• Use only soft clean cloth to clean the exterior of the device.
• Keep away from sources of heat, such as heating appliances, sunlight
or central heating. Do not keep the device at temperatures higher than
60oC (140oF).
• Switch off the unit and remove the batteries during the extended
periods of non-operation.
• Do not apply excessive force or pressure to the lens assembly, this
may damage fragile elements and thread connections.
• Small dark and/or white marks may be seen in the field of view. This
does not affect the operational capabilities of the device.
• Do not remove the cover from the lens other than for night-time
operation.
9
8. TROUBLESHOOTING
8.1.
The scope does not turn on
Check whether the batteries are installed properly. Check the charge of
the batteries. Replace if they are weak. Do not mix old batteries with new
ones.
8.2.
The target does not appear in focus.
Bring the target to the center of the image. By turning the knob 8 (Fig.1)
achieve the clearest target acquisition on the screen. If NVS 22-2XT is
used with daytime scope re-focus it. Repeat the focusing of NVS 22-2XT
and scope if necessary.
If the image still does not seem to be in focus, clean the lenses. They
could be foggy or dusty.
8.3.
Image has disappeared.
If the objective lens of switched on NVS 22-2XT are exposed to bright
light it automatically shuts off to protect the image intensifier tube from
overload. When it happens, turn the unit off, wait for a few seconds and
turn it on again.
If the image has been lost at the moment of a shot, check contacts in the
battery compartment.
8.4.
Condensation accumulates on the parts
In order to avoid misting of the eyepiece lens at cold use the special
protective cover.
8.5.
Black dots on the screen
These are some blemishes in the image intensifier, which do not affect
the performance or reliability of a night vision device. Blemishes may
vary in size and number; they are inherent in the manufacturing process.
Most of them are seen in the daytime only and become almost invisible
during the night time.
10
9. WARRANTY
NEWCON warrants this product against defects in materials and
workmanship for one year from the date of the original purchase, but no
more than 12 months from the date of manufacturing. Longer warranty is
available, subject to the terms of the specific sales contract. Should your
Newcon product prove to be defective during this period, please deliver
the product securely packaged in its original container or an equivalent,
along with the proof of the original purchase date, to your Newcon
Dealer.
Newcon will repair (or, at its option, replace with the same or
comparable model), the product or part thereof, which, on inspection by
Newcon, is found to be defective in materials or workmanship.
What This Warranty Does Not Cover:
NEWCON is not responsible for warranty service should the product fail
as a result of improper maintenance, misuse, abuse, improper
installation, neglect, damage caused by disasters such as fire, flooding,
lightning, improper power supply, or service other than by a NEWCON
Authorized Service.
Postage, insurance and shipping costs incurred while presenting your
NEWCON product for warranty service are your responsibility.
If shipping from North America please include a cheque or money order
payable to NEWCON OPTIK for the amount of $25.00 to cover handling
and return shipping.
11
10. CUSTOMER SUPPORT
Should you experience any difficulties with your Newcon Optik product,
please, consult this manual first.
If the problem remains, contact our customer support department at
+1(416) 663-6963 or toll free at 1-877-368-6666 (North America only).
Our operating hours are 9am-5pm, Monday - Friday, Eastern Standard
Time.
Under no circumstances should the equipment be sent to Newcon without
authorisation from our technical support department.
Newcon accepts no responsibility for unauthorized returns.
To locate NEWCON Authorized Dealer call +1(416) 663-6963 or
fax +1(416) 663-9065
Email: [email protected]
The defective products should be shipped to:
US Customers:
2331 Superior Ave. Cleveland, OH 44114, USA
From all other countries:
105 Sparks Ave., Toronto ON, M2H 2S5, CANADA
12
11. ACCEPTANCE CERTIFICATE
NVS 22-2XT unit serial number:
_________________________________
Image Intensifier Tube serial number: ____________________
Minimum Measured
Resolution, lines/mm
45
Photocathode sensitivity,
integral, μA/lm
400
Light amplification
25,000
The unit complies with all technical specifications and
has passed the inspection.
Date of production: _________________________________
Quality Inspector: __________________________________
Quality Assurance Seal
13
NEWCON OPTIK™ 2010
Printed in Canada
|